I have matsuura mc800 vf.
I enter any speed value in mdi and start spindle with m03 code.The spindle starts turning to maximum turning speed (8400).There is no alarm or warning.There is right speed value on the computer screen and JVOP100 on the driver.The maximum speed of the spindle is 8000.The orientation executes well.M04 and hand spindle start behave same.When i stop the spindle sometime shows f100 alarm.
It started once, after morning start up.
I think it's may be problem with command from the NC,or driver upper board,but i don't know how to chek it.Please help!