512,634 active members
4,267 visitors online
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Registered
    Join Date
    Apr 2014
    Posts
    1

    Any suggestions on how to go about cutting this?

    Hello! Was googling my question a bit earlier and ended up here. So many threads, it's a little overwhelming but such a great forum.

    I had a question about the name inside of these earrings and how to have these precisely cut. I've tried to cut some thin metal pieces but it seems I'm not steady enough. Is there an easier way to do this, maybe by a small laser? I've looked at videos and all I seem to come across are the huge laser machines and thought surely there should be smaller machines made for smaller projects such as these. I could be wrong though.

    If anyone has any suggestions, it would be greatly appreciated. Thanks for looking.

    Attachment 230944

  2. #2
    Registered
    Join Date
    Nov 2010
    Posts
    761

    Re: Any suggestions on how to go about cutting this?

    Waterjet
    CNC lasers, constructions, service

  3. #3
    Registered
    Join Date
    Nov 2012
    Posts
    476

    Re: Any suggestions on how to go about cutting this?

    What is your budget for a machine.
    If these are metal pieces a laser to cut them is big bucks. Better to outsource them.

  4. #4
    Company Representative
    Join Date
    Sep 2012
    Posts
    212

    Re: Any suggestions on how to go about cutting this?

    Common lasers can't do.
    G.Weike Laser
    melody@vip.163.com li@wklaser.com skype:melody.gweike

Similar Threads

  1. Suggestions for cutting wood plugs?
    By WoodNWall in forum Uncategorised WoodWorking Machines
    Replies: 4
    Last Post: 02-06-2014, 05:40 PM
  2. Cutting Tool Suggestions
    By Jonathan3520 in forum Uncategorised MetalWorking Machines
    Replies: 4
    Last Post: 11-15-2006, 05:56 AM
  3. Cutting Tool Suggestions
    By Jonathan3520 in forum Shopmaster/Shoptask
    Replies: 3
    Last Post: 11-10-2006, 06:28 PM
  4. Cutting suggestions
    By Tazzer in forum Vectric
    Replies: 2
    Last Post: 07-20-2006, 11:32 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •