I bought all the stuff to add Renishaw probes to my 4020. I have a 1992 machine, with a 1400-4 processor.

There are two probes, an MP4 tool setter probe, and an in-spindle wireless probe, MP10.

the parts list:
MP10 in spindle probe
MI12 machine interface box (for use with the MP10 spindle probe)
MI8 machine interface box (for use with the MP4 tool setter)
OMM - the IR transciever that gets mounted on the machine wall to talk to the spindle probe
Fadal PCB 0137 (1570-1) 3-probe interface
2 solid state relays (black, 3 amp)
3 fuses
1 2.5A breaker.

I'll take some pictures hopefully tomorrow or the next day and continue to document the install.



I have a question for those who have a probe setup on their fadal already, where does the 1570-1 / pcb0137 board get mounted in the cabinet by the factory? I can mount it wherever I want to drill some holes I guess, but the board itself doesn't have any mounting holes for standoffs. The board that I have is also labeled 'snap track' so maybe that means something about the mounting style.