[Winterwatchers]

For those who have a HiTorque mini mill or upgraded the column to one. Can you provide the dimensions of the column and the locations of the mounting holes please? I am thinking of the using the column on a hunk of metal to make my mill.

[doorknob]

I have the solid column upgrade from Little Machine Shop but have not yet unpacked it from the shipping box.

If nobody else chimes in with the dimensions I should be able to check them for you, but it may take a day or so for me to be able to get to it.

[Winterwatchers]

Thanks. I tried searching the forum but no luck.

[doorknob]

Please identify which dimensions you are looking for:

Attachment 232684

[Winterwatchers]

The location of the mounting holes, hole size and the general overall dimensions please

[doorknob]

These are rough dimensions only:

Column height: 20-3/4"

Column width: 4"

Column depth (not including dovetail): 2-1/8"

Column depth (including dovetail): 2-1/2"

Base dimensions (not including dovetail): 6-1/8" x 2-3/4"

Base hole centers located at the corners of a rectangle 5-3/8" x 2"

Base hole diameter: 0.323" (P drill bit)