Limit switch help on 2110 motherboard
I am having a heck of a time getting my limit switches to work.
My computer is giving a solid 4.9v through the printer port and then coming out of the rutex board I am getting a whopping 1v through the limit switches
5v limit switches I know are bad enough with noise as it is but with the measly 1v I am getting from the mother board I get a false switch trigger just by thinking!
any help would be great!
IE how to get that 1v up to the target of 4.9v
or if there is a way to change to 24v without massive changes that would be awesome too!
thanks
Michael T.
"If you don't stand for something, chances are, you'll fall for anything!"