Does anyone know the size of the box that is used in the 4 axis kit that is sold by cncrouterparts I am making a cabinet and need to know all the dimensions of the case. Please see link below of the kit.
4-Axis Plug and Play Nema 23 System | CNCRouterParts
Results 1 to 2 of 2
-
11-09-2014, 03:45 AM #1
Registered
- Join Date
- Apr 2013
- Posts
- 56
Need the measurements of the control box
-
11-11-2014, 12:18 AM #2
Registered
- Join Date
- Jun 2013
- Posts
- 88
Re: Need the measurements of the control box
Our 4 Axis Nema 23 Plug and Play enclosure is 400mm wide x400mm tall x200mm deep. I would allow another 200mm below the system for the cables to connect to the control box.
Best regards,
Cory
CNC Router Parts
Reply With QuoteSimilar Threads
-
A Few Measurements Needed...
By SCzEngrgGroup in forum Tormach Personal CNC MillReplies: 6Last Post: 01-30-2013, 01:15 AM -
Need NM-200 Measurements
By MRM RCModels in forum NovakonReplies: 1Last Post: 03-06-2012, 06:54 PM -
X2 Spindle Measurements
By michaelthomas in forum Benchtop MachinesReplies: 6Last Post: 03-21-2011, 04:33 AM -
sieg x2 measurements?
By ihavenofish in forum Benchtop MachinesReplies: 2Last Post: 08-13-2009, 07:13 PM -
Need Help with some Gear Measurements
By Kain in forum Mechanical Calculations/Engineering DesignReplies: 9Last Post: 07-17-2009, 03:24 AM
Tags for this Thread
Posting Permissions
