585,875 active members*
3,808 visitors online*
Register for free
Login
IndustryArena Forum > Mechanical Engineering > Linear and Rotary Motion > How many MM per rev for a wood router?

Thread: How many MM per rev for a wood router?

Results 1 to 2 of 2
  1. 06-26-2006, 08:33 PM #1
    WayneC
    WayneC is offline Registered
    Join Date
    Oct 2004
    Posts
    38

    How many MM per rev for a wood router?

    I'm in the planning stages of upgrading my Shopbot CNC router, which will include a new Z axis with ball screw/stepper motor.

    How many MM per revolution should I consider for the Z axis ball screw?

    I cut lots of 2D profile cuts, but I also need to be able to do sign work and some moldmaking. So resolution is important, but not critical like a lathe or mill might be.

    Thanks for the input!

    Wayne from White Salmon
    Reply With Quote Reply With Quote
  2. 06-26-2006, 10:53 PM #2
    ger21
    ger21 is offline Community Moderator
    Join Date
    Mar 2003
    Posts
    35538
    As long as your motor has enough power, I'd say around 10mm, which should give you good speed and still have decent resolution.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules