We have a CNC 88HS control.
I load programs from the PC into the control through RS232.
I use the TA,1 command at the control prior to sending from the PC.
Until some point in the recent past, the programs would load and be ready for use right away.
Now what happens is the program loads and the control automatically executes a PU command and runs through the program line by line.
This is annoying and time consuming.
Any ideas on how to resolve this would be appreciated.
Thanks
Results 1 to 3 of 3
-
04-22-2014, 02:38 PM #1
Registered
- Join Date
- Sep 2007
- Posts
- 100
Problem Loading Programs into CNC 88HS Control
-
05-03-2014, 12:47 AM #2
Registered
- Join Date
- Apr 2005
- Posts
- 1194
Re: Problem Loading Programs into CNC 88HS Control
You may be in for a complete re-initializing of the memory.
We have had good luck with our Fadals milling mostly soft steel and aluminum up to 5 axis. We are always looking for spare parts
If you have a broken down Fadal give a shout.
-
05-05-2014, 02:58 PM #3
Registered
- Join Date
- Sep 2007
- Posts
- 100
Re: Problem Loading Programs into CNC 88HS Control
Thanks.
I will explore that option when I have some free time.
Reply With QuoteSimilar Threads
-
Problem Loading "Sub Cycle Programs"
By Katoom in forum Hardinge LathesReplies: 2Last Post: 03-16-2011, 09:33 PM -
Loading multiple programs into 18i-TB?
By Crash in forum FanucReplies: 2Last Post: 05-06-2008, 12:21 PM -
Problem loading programs into DX32 control
By D.Blair in forum Bridgeport / Hardinge MillsReplies: 1Last Post: 03-05-2008, 03:32 AM -
loading programs into dos
By bkstout in forum CNC (Mill / Lathe) Control Software (NC)Replies: 7Last Post: 02-13-2006, 03:05 AM -
loading programs into dos
By bkstout in forum Employment OpportunityReplies: 0Last Post: 02-10-2006, 07:37 PM
Tags for this Thread
Posting Permissions
