584,817 active members*
4,842 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Murata wiedemann Centrum 2000 turret punch, Fanuc 0p controller
Results 1 to 8 of 8
  1. #1
    Join Date
    Sep 2012
    Posts
    5

    Murata wiedemann Centrum 2000 turret punch, Fanuc 0p controller

    Greetings all!!!

    Is anyone having the papers of the special parameters. its a A4 list of the parameters, says for example no. 071 turret chain, 122 index..............
    I miss them for years and i need them to recalibrate the machine time to time

    If anyone have a centrum 2000 please give a hand

    I also have a good experience in repairing the machine in case anyone is having any problems

    Thanks
    Dallas

  2. #2
    Join Date
    Dec 2013
    Posts
    4

    Re: Murata wiedemann Centrum 2000 turret punch, Fanuc 0p controller

    Need Help: muratec 1544 punch laser
    I thank you so much for video which I watched it many times . I bought Muratec Hibrid Flexi Laser Machine Model 1544 three years ago from Japan ( MY 1997) for sheet metal job but I failed to run machine. I really need your help and guide.
    I am ready to bear all charges if you can help us to run the machine. I am looking forward to hearing from you at your earliest convenience.
    1123 A10.3: Laser Oscillator not ready ( Laser Oscillator Not Started yet due to bellow alarms )

  3. #3
    Join Date
    Nov 2006
    Posts
    16

    Re: Murata wiedemann Centrum 2000 turret punch, Fanuc 0p controller

    Dear Dallas,

    Do you have operating manual for Centrum 2000/Q?
    Which software do you use for NC output?

    Please support me

    Regards
    CaH

  4. #4
    Join Date
    Sep 2012
    Posts
    5

    Re: Murata wiedemann Centrum 2000 turret punch, Fanuc 0p controller

    operation manual is like a book..... what do you want to know

  5. #5
    Join Date
    Nov 2006
    Posts
    16

    Re: Murata wiedemann Centrum 2000 turret punch, Fanuc 0p controller

    Dear Dallas,

    Unable to communicate by DNC, I want to know pin outs for RS232C cable & parameter setups
    Do you have post for CNCKAD?

    WIEDEMANN CENTRUM 2000 Q,
    Max. pressure T 20,
    Max. thickness mm 6,35
    Depth of throat mm 1020,
    Strokes per minute n° 420,
    Tool turret n° 22 (2 index)
    Max. working dimensions mm 1270x1030,
    CNC Fanuc op

  6. #6
    Join Date
    Nov 2006
    Posts
    16

    Re: Murata wiedemann Centrum 2000 turret punch, Fanuc 0p controller

    Dear Dallas,

    I tried a lot for DNC setups, Could you please support me?

    Regards
    CaH

  7. #7
    Join Date
    Oct 2012
    Posts
    40

    Re: Murata wiedemann Centrum 2000 turret punch, Fanuc 0p controller

    Hi,
    still you are use pc for RS232c communication, here i have one device for transfer your program to machine with USB pen drive option.
    The device is very compact and user friendly. with my device you can transfer program and parameters to machine and also take backup of the same in to device.
    it has 4Gb internal memory to store program and parameters, 2.5" Lcd display to see the program or parameter data, 2 usb port to transfer or received data.

    Please feel free to contact me for further details of device.
    you can mail me>>>> [email protected]
    website>>>>> protecdncsystems.com
    call or whatsapp >>>> +91 8149636586
    Click image for larger version. 

Name:	TITAN 06.jpg 
Views:	3 
Size:	87.9 KB 
ID:	367628

  8. #8
    Join Date
    Nov 2019
    Posts
    2

    Re: Murata wiedemann Centrum 2000 turret punch, Fanuc 0p controller

    SOMEONE COULD SEND ME A PHOTO OF THE HYDRAULIC SYSTEM CONNECTION, PLEASE.

Similar Threads

  1. Replies: 4
    Last Post: 08-26-2018, 05:09 AM
  2. Replies: 2
    Last Post: 08-10-2018, 03:46 AM
  3. Wiedemann CENTRUM 2000Q - FANUC 6M Can't zero set.
    By GuntherDeclerck in forum Fanuc
    Replies: 7
    Last Post: 11-07-2016, 04:00 PM
  4. GE 1050 controller on Behrens Turret Punch
    By TZak in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 12-10-2010, 04:53 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •