502,785 active members
3,992 visitors online
Register for free
Login
IndustryArena Forum > CAM Software > Uncategorised CAM Discussion > EZCAM anyone here ever use it?
Results 1 to 2 of 2
  1. #1
    Moderator tobyaxis's Avatar
    Join Date
    Jan 2006
    Posts
    4396

    Question EZCAM anyone here ever use it?

    I presently use BobCad V20.6 and very tired of doing WaterLine Roughing Manually on Solids. It gets to be a pain, and I'm looking for different software in the budget. It supports Full 4 Axis Milling (C Axis or A), tapered end mills, bull mills, ball mills, drills, radius form cutters, and standard end mills.

    Anyone with additional info on this software? Likes/Dislikes? Warnings of any kind?

    I really need better CAM for the work I would like to do.

    Thanks Guys :cheers:
    Toby D.
    "Imagination and Memory are but one thing, but for divers considerations have divers names"
    Schwarzwald

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

    www.refractotech.com

  2. #2
    Moderator tobyaxis's Avatar
    Join Date
    Jan 2006
    Posts
    4396
    Guess not. That's Ok, I didn't like it either. :cheers:
    Toby D.
    "Imagination and Memory are but one thing, but for divers considerations have divers names"
    Schwarzwald

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

    www.refractotech.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •