How do we activate (or) enable, G70 thru G76? When we try, PS Alarm 10 occurs. (An unusable G code was commanded).
Thanks Cat Wheeler
How do we activate (or) enable, G70 thru G76? When we try, PS Alarm 10 occurs. (An unusable G code was commanded).
Thanks Cat Wheeler
I haven't encountered this but on the newer citizen machines there are parameters that effect g76. Might be worth a shot
I also think that it is a parameter. You will probably have to contact your distributor or citizen to get the parameter number unless someone here chimes in, but that is fairly obscure.
Edit: I dug up an old ducument. Try setting parameter 9930 bit 4 to whatever it isnt (1 or 0) Remember it starts at bit 0, so number 4 would actually be the fifth digit. That for a 16i control, but the 9000 parameters dont change too much.
CNC Product Manager / Training Consultant
F20 - FANUC 3T - hasnt G70&G76