Just wondering :
1. Has anyone added a stepper motor to their 3-in-1 lathe spindle? I assume a clutch will be needed for when you're just turn the lathe.
2. What CAD/CAM software combination do you like for:
A) XYZ axis on the 3-in-1
B) XYZ and Q2 axis (lathe as 4th axis) for mill. I chose Q2 because Q would be for rotation around the Z axis... just in case you were wondering (Q2 for rotation around the Y axis).
Results 1 to 1 of 1
-
04-30-2014, 08:59 PM #1
Registered
- Join Date
- Apr 2014
- Posts
- 52
CAD/CAM for 3-in-1 lathe/mill combo with lathe spindle stepper motor
Reply With QuoteSimilar Threads
-
Stepper Motor As Lathe Spindle
By 2_many_hobbies in forum Taig Mills / LathesReplies: 12Last Post: 05-30-2012, 05:00 PM -
lathe mill combo
By lee heroux in forum Want To Buy...Need help!Replies: 0Last Post: 08-31-2009, 07:04 PM -
Mill/Lathe combo cnc?
By JSU in forum Uncategorised MetalWorking MachinesReplies: 2Last Post: 09-03-2006, 10:01 PM -
Mill/Lathe combo cnc?
By JSU in forum Vertical Mill, Lathe Project LogReplies: 2Last Post: 09-03-2006, 10:01 PM
Tags for this Thread
4th,
4th axis,
axis,
cad,
cad/cam,
cam,
cam software,
case,
combination,
combo,
general cam discussion,
just in,
lathe,
lathe spindle,
mill,
moto,
motor,
needed,
rotation,
software,
spindle,
stepper,
stepper motor,
turn,
y axis
Posting Permissions
