585,722 active members*
4,280 visitors online*
Register for free
Login

Thread: Fanuc 0 M - Spindle Stop

Results 1 to 3 of 3
  1. 06-30-2006, 03:45 PM #1
    Uncle Buck
    Uncle Buck is offline Registered
    Join Date
    Mar 2006
    Posts
    45

    Unhappy Fanuc 0 M - Spindle Stop

    When running a program and needing to index the carbide inserts, my machine will not stop the spindle...

    is there a paramater that will enable me to press my spindle stop button and stop the spindle and then be able to restart the spindle after the indexing of the inserts has happened, and then continue with the program?

    thanks

    Goran
    Reply With Quote Reply With Quote
  2. 06-30-2006, 04:05 PM #2
    Al_The_Man's Avatar
    Al_The_Man
    Al_The_Man is offline Community Moderator
    Join Date
    Dec 2003
    Posts
    24220
    Normally that function would be written in to the ladder by the machine tool builder.
    to allow a manual stop during a M3/M4
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.
    Reply With Quote Reply With Quote
  3. 07-01-2006, 12:18 AM #3
    Ozemale6t9
    Ozemale6t9 is offline Registered
    Join Date
    Mar 2006
    Posts
    167
    I have seen some machines (can't remember if on Fanuc though) where you can hold feed-hold for a few seconds, and the spindle will stop. Worth a try though.

    regards, Oz
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules