501,747 active members
5,461 visitors online
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Jul 2007
    Posts
    177

    Still no wood, but .....

    Since my first attempt on a Movement was not successfull at all, due to the missing supply of watchmaking parts ( stones and small parts like shockabsorbers) i was in need of some temporary distance to forget about the high personal efforts)! Now I'm back .. starting from lower level I managed to finish my own housing in the first attempt including the movements Fitting, dial, hands and the other parts - without the movement the crown and the triggerbuttons, I bought from stock( I used a ETA 7750 chronograph in medium finish grade from Swizerland)
    Why reach for speed, when you could have precision instead!!!

  2. #2
    Registered
    Join Date
    Jul 2007
    Posts
    177

    Re: Still no wood, but .....

    ... After the watch was successfully finished I was hot on another attempt of a movement with another parts supply strategy - first gathering all critical parts and afterwards construction and assembly.

    ... Now here are the pictures of status quo.
    Attached Thumbnails Attached Thumbnails 1.jpg   12.jpg   3.jpg   11.jpg   5.jpg  

    8.jpg   10.jpg  
    Why reach for speed, when you could have precision instead!!!

Similar Threads

  1. Small CNC Wood Router VS Large CNC Wood Router
    By omnicnc in forum News Announcements
    Replies: 2
    Last Post: 03-16-2013, 06:25 AM
  2. Replies: 0
    Last Post: 07-21-2012, 03:14 AM
  3. Carve Wood On CNC Wood Router
    By omnicnc in forum Omni CNC
    Replies: 0
    Last Post: 05-24-2012, 07:15 AM
  4. tired a wood called bow wood or orange osage
    By woodman08 in forum Gorilla CNC Machines
    Replies: 2
    Last Post: 01-17-2010, 03:37 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •