I thought the MCX was supposed to provide g-code. How do I do this? I have a generic 2D piece I made and I want to export the code to TurboCNC for cutting. What do I need to do? Thanks for any help or ideas
I thought the MCX was supposed to provide g-code. How do I do this? I have a generic 2D piece I made and I want to export the code to TurboCNC for cutting. What do I need to do? Thanks for any help or ideas
Run it thru a post processor. They come with Mastercam.
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
what is that and how do I go about doing that? Thanks for the reply
Find the post for your controller (TurboCNC?) and run it via the POST button in the ops manager.
Matt
San Diego, Ca
___ o o o_
[l_,[_____],
l---L - □lllllll□-
( )_) ( )_)--)_)
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)