okuma newbie question for indexer B axis:
how does the OSP7000 control keep track of the tool tip? separate offsets at each angle?
how would the setup for a turning tool differ from a milling tool?
thanks in advance:cheers:
okuma newbie question for indexer B axis:
how does the OSP7000 control keep track of the tool tip? separate offsets at each angle?
how would the setup for a turning tool differ from a milling tool?
thanks in advance:cheers:
What's your location? Maybe I can get you some help.
Manual I was reading went into some detail with the slant feed mode. Seems more like a manual method of operating and programming. Not sure if this feature is helpful in a cad cam environment.
Hmmmm?
Sent from my Nexus 7 using Tapatalk
Here's my email: [email protected]
Send me your contact info and machine info. I'll do what I can to have someone help you out.
Rick has been Very helpful already. What a great organization Gosiger is!
Sent from my Nexus 7 using Tapatalk
What's the name of your company?
aaah; G52 and G174!!
http://www.freewebs.com/magellan/Upl..._Rev%202.6.pdf
page 25ish
thanks for all the replies. LoL :banana: