I am sure i am missing something here.

i need to put in my pmc data parm. in the machine and it just wont do it. is there a parm you need to turn on 1st?
i can enter all the other parms just pmc data ones arent inputting.

tried the eob trick e stop trick, pretty much everything i read that may work.
i am guessing there is a parameter i need to activate before i can succesfully input them?

yes write protect is off and the pwe is enabled. also tried MDI and edit
manual says call up number
have in mdi
type in data
press input.

nothing happens. these are my 310-350 pmc parameters, i do not have any 900's mine stops at 828

Thank you
Delw