[AdrianPage]

I am about to order my laser cutter and I need to choose between these 2 controllers. I will be cutting balsa and ply model airplane parts. Can anyone explain why I would want one over the other?

Adrian

[zmxinyu]

hello Adrian,
The RDC6442G is new to the 6332G.It can double plus scrap automatic typesetting features, support progressive feeding than 6332G.It has also other difference.You can find that on there website:SHENZHENREADER TECHNOLOGY CO.,LTD
Hope can help you
Best regards,
Emily

[AdrianPage]

Thank you for posting Emily. I don't know what "double plus scrap automatic typesetting" or "progressive feeding" means.

Adrian

[gweikelaser]

Adrian,

I will suggest the 6442G, the RDCAM engineer suggest like this. cause they said once they upgrade some functions, the 6642 is the first, then the6332G

Best Regards

Thank you for posting Emily. I don't know what "double plus scrap automatic typesetting" or "progressive feeding" means.

Adrian

[AdrianPage]

I couldn't see any compelling reason to choose the 6442 4 axis controller with less memory so I chose the 6332 because it has twice as many buttons to push. It also has twice the memory. The 6442 is for twin head lasers.

Adrian

[6345789]

I couldn't see any compelling reason to choose the 6442 4 axis controller with less memory so I chose the 6332 because it has twice as many buttons to push. It also has twice the memory. The 6442 is for twin head lasers.

Adrian

Is there anyone or company in the United States that sell the 6442?
My control panel has stopped working. May be mother board is gone or part of power supply that works laser. Water pump and other lights come on.

[AdrianPage]

Sorry mate... I do not know. Air freight one in from China?

Adrian

[GeneMpls]

Is there anyone or company in the United States that sell the 6442?
My control panel has stopped working. May be mother board is gone or part of power supply that works laser. Water pump and other lights come on.

I believe that the 6332 is a 3 axis and the 6442 is a 4 axis (one extra). LightObject.com sells a slightly modified 6442 as their R5 controller. The only difference I can see is you must use the LO version of RDworks V8- which looks/works exactly like the normal version. They are in California and I have ordered a couple controllers from them with no difficulties. Gene

[ELINGENIERO]

The difference between RDC6442S and RDC6442G as follows:
RDC6442G only support one laser head, however, the RDC6442S support 2 laser head
RDC6442S is the most widely used Co2 laser laser controller