584,846 active members*
3,763 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > Commercial CNC Wood Routers > DynaCNC > Please Help! - DynaCNC 4000 Blowing Z Axis Fuses
Results 1 to 2 of 2
  1. #1
    Join Date
    May 2014
    Posts
    1

    Please Help! - DynaCNC 4000 Blowing Z Axis Fuses

    I have a very large DynaCNC table with a Z axis problem. As soon as I reset Mach 3, the control box kicks in, then out and blows the 10 amp mini auto style fuse. It just started doing this and happens as soon as the reset is pressed on Mach 3. Any ideas on what to check or how to go about troubleshooting would be greatly appreciated. Thanks in advance.

    Thanks,

    Brian

  2. #2
    Join Date
    May 2007
    Posts
    111

    Re: Please Help! - DynaCNC 4000 Blowing Z Axis Fuses

    try swapping gecko's between z and x or y and see if the problem follows the gecko.

Similar Threads

  1. Keep blowing fuses
    By bujaman in forum Maintenance DIY Discussion
    Replies: 2
    Last Post: 01-29-2014, 07:26 PM
  2. Y-axis servo motor blowing fuses
    By crazeekev in forum Bridgeport / Hardinge Mills
    Replies: 8
    Last Post: 02-08-2009, 11:39 AM
  3. Blowing Z axis fuses on 6MB
    By moldmker in forum Fanuc
    Replies: 13
    Last Post: 08-30-2008, 05:34 AM
  4. X-Axis Blowing fuses
    By Thom45 in forum Commercial CNC Wood Routers
    Replies: 0
    Last Post: 02-21-2007, 08:33 PM
  5. Blowing the fuses
    By rocks101 in forum Hobbycnc (Products)
    Replies: 2
    Last Post: 02-26-2005, 10:00 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •