584,866 active members*
4,937 visitors online*
Register for free
Login
Results 1 to 7 of 7
  1. #1
    Join Date
    Apr 2003
    Posts
    159

    Hobbycnc controller

    Hi Gang
    My first router has a hobby cnc controller( at least 2 years old) based on the 5804 ic and I need the pinout or schematic for it.
    Does anyone have a copy of the schematic. It's too difficult trying to trace the pinouts 'cause I have it hardwired into the box.
    Is Dean of Hobby cnc the same as Dean of Axxus?
    Thanks..............Jim

  2. #2
    Join Date
    Apr 2003
    Posts
    416
    Jim,
    If your hobbycnc board is the same as mine, here are the pinouts:

    X step 2
    X dir 6
    Y step 3
    Y dir 7
    Z step 4
    Zdir 8
    Gnd 24
    X home 11
    Y home 12
    Z home 13
    Limit 10

    Bill.

  3. #3
    Join Date
    Sep 2003
    Posts
    14
    Hi Jim

    It was Deans Hobby CNC before he changed it to Axxus Technology a couple of years ago.
    Dean lives in Edmonton, Alberta, Canada

    Joe

  4. #4
    Join Date
    Sep 2003
    Posts
    14
    Hi Jim

    Dean was Deans Hobby cnc before he changed the name to Axxus
    Technology a couple of years ago.
    Dean lives in Edmonton, Alberta, Canada.

    Joe

  5. #5
    Join Date
    Apr 2003
    Posts
    159
    Thanks a lot I found it was setup for Dancam.

  6. #6
    Join Date
    Apr 2003
    Posts
    159
    One more thing I'm looking for is a schematic for a parallel port breakout board similar to the one Axxus has.
    If anyone knows where I can find one please let me know........................Thanks again...Jim

  7. #7
    Join Date
    Sep 2003
    Posts
    1469
    EAS has a breakout board for $5.00 (bare).
    http://www.embeddedtronics.com/

    Go to the "Microstep" then select "breakout board".

    They show the schematic but for $5.00, I baught it. The parts list is shown which shows the DigiKey PN, for convience. Or you could buy the on board connectors from a good electrical supply. They don't sell a populated board.
    Hope this helps.
    Hager

Similar Threads

  1. Taig Mill, US Digital MS23, Controller???
    By marjamar in forum Taig Mills / Lathes
    Replies: 3
    Last Post: 02-07-2007, 04:16 PM
  2. Open Source CNC Controller Specification
    By gregmary in forum DIY CNC Router Table Machines
    Replies: 28
    Last Post: 12-05-2005, 04:58 AM
  3. HobbyCNC 3 axis controller board review
    By cncadmin in forum Hobbycnc (Products)
    Replies: 32
    Last Post: 02-10-2005, 11:43 PM
  4. HobbyCNC controller spindle control?
    By PranksterO in forum CNC Machine Related Electronics
    Replies: 6
    Last Post: 07-27-2004, 12:40 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •