[BlueChip]

Does anyone have a PDF file with info on how to program a 4 axis wire EDM machine? ... just looking to learn so it can be any machine and any control ... maybe something like a machine operators or programmers manual.

OR ... does anyone have a link to any site where one can be downloaded?

I've been searching but no luck yet. ANY help would be greatly appreciated ... Thanks in advance.

[mmmilligan]

One approach would be to download Dolphin EDM, this contains a 2 & 4 axes
programming package. Download is free and you can use the software to experiment with various methods of 4 axes programming i.e. produce two contours (top and bottom) with Wire Synchronising points or produce a single contour with Wire angle or UV axes commands.

The download will install a fully functional demo with the only limitation being that post processing is inhibited.

Regards

Michael
Dolphin CAD CAM Systems Ltd

[roysol]

The programming chapter is 5.5 Mb, the max upload limit here is 2.0 Mb. I can e-mail it to you, if you want to post an addy.

[BlueChip]

Thanks roysol ... greatly appreciated. If you would, you could email it to [email protected] ... thanks a million.