Dear
I have a cnc okuma lath with osp3000 but I have no manual. Can anybody please send me the user manual. I shall be very thankful to you.
Thanks
Dear
I have a cnc okuma lath with osp3000 but I have no manual. Can anybody please send me the user manual. I shall be very thankful to you.
Thanks
Which manual, and which model lathe?
Thanks for your time.
Model is okuma LC30
Control osp3000
I hope this helps you out!
Thanks for the help. I'll read this. Maybe this solve my problem.
Thanks
Sent from my IM-A830L using Tapatalk
Thought I had posted a link to this, but that post is gone...?
Here's the file attached directly.
Attachment 240348
Thanks brother...
So nice of you. I am very thankful to you...
Sent from my IM-A830L using Tapatalk
Hi brothers i have also okuma with osp 3000 and i dont have any manual wouls u pls can u send me this manual ?and do you know how to reload parameters by tape reader.i have paremeters on tape but dont know how to do.thanks in advance.
Thanks friend for this support, could you please share again that manual?
Sent from my iPhone using Tapatalk
It´s a dual turret lathe? Do you have schematics?