Hi

After a couple of years reading this forum i started to design my own diy plasma table. After many hours of planning i decided to contact Tom on CandCNC to buy all the hardware needed to start my build. I was then inform that Tom doesnt ship to my country. Disappointed i drop the project off.

Now i have the chance to buy an used old plasma table for about 5500 usd.

The dimension arent what i wish for i needed a bigger table but i can handle it for now.

I would like if you guys can give me an opinion if its worth it.

Some pics.

Attachment 240296
Click image for larger version. 

Name:	Imagem-de-Mesa-CNC-corte-plasma_454062847_11.jpg 
Views:	0 
Size:	80.7 KB 
ID:	240298
Click image for larger version. 

Name:	Mesa-CNC-25-X-12-mt-completa-Control-THC300-Sof_454062847_9.jpg 
Views:	0 
Size:	60.3 KB 
ID:	240300
Click image for larger version. 

Name:	Mesa-CNC-corte-plasma-Comercio-e-Industria_454062847_3.jpg 
Views:	0 
Size:	74.5 KB 
ID:	240302
Click image for larger version. 

Name:	Mesa-CNC-corte-plasma-Faro_454062847_5.jpg 
Views:	0 
Size:	84.9 KB 
ID:	240304
Click image for larger version. 

Name:	Mesa-CNC-corte-plasma-6000-euro_454062847_8.jpg 
Views:	0 
Size:	44.6 KB 
ID:	240306

Best Regards and sorry for my crappy english

Is