[JustinM]

I need a quote for two motor endcaps (see attached dxf) to be made out of 6061 with you providing stock. Will need by the end of August at the latest, soon as possible preffered but not required.

Please send quotes to teamsawzall [at] twcny [dot] rr [dot] com

Thank you,
Justin Mathews

[fuzzman]

YGEM

[RONALD WESTLING]

I need a quote for two motor endcaps (see attached dxf) to be made out of 6061 with you providing stock. Will need by the end of August at the latest, soon as possible preffered but not required.

Please send quotes to teamsawzall [at] twcny [dot] rr [dot] com

Thank you,
Justin Mathews

HELLO,

OUR PRICE WOULD BE 97.50 EACH INCLUDING MATL.

RESPOND TO [email protected]

THANK YOU,

RONALD WESTLING JR (SYSTEMS MANAGER)

TRACER TOOL AND MACHINE
32 IRON HORSE RD
OAKLAND NJ 07436

[mikeh78]

justin,
You have an E-mailed Quote
Mike Hesse
Hessemachine.com

[sendkeys]

HELLO,

OUR PRICE WOULD BE

Thank you ronald for quoting in the message board i really like to see the prices you guys give. Nice to see what the going prices are for parts.

[fuzzman]

Well if it makes a difference, here's my quote below,they let me do home projects on the side as long as there is an open machine. As a matter of fact, I went ahead and ran 2 of these parts yesterday afternoon and will have pics of them later today.

Quote:
I can make these for $38.00 ea. with myself providing
6061-T651 material. Also I need to know what kind of
tolerance you need, I'm assuming +-.002 would be ok.
Let me know if there is a difference. Thanks.

George Sharp
500 West Point Rd.
Somerville, AL 35670
256-508-3597

[fuzzman]

Here's a pic. Let me know if you need them.

[JustinM]

Thank you all for your quotes. I dont feel OK releasing what the final price I was quoted on by the guy I selected doing the job without his permission. Thank you fuzzman for the pictures those look really nice.

I'd like to thank everyone again, you all have been really helpful.
-Justin Mathews

[fuzzman]

Justin, you have a pm.