584,802 active members*
4,845 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Nov 2011
    Posts
    4

    FEMCO HL25E DURGA HELP

    Hi, I recently bought a troublesome 98 FEMCO HL25E among other issues is that the operator panel is so badly worn that the silk screen is unreadable. On many of the push buttons the lens and legends have broken off. The operation manual does not have an illustration either and I am a beginner. The controller is a Fanuc 0T(A) to the best of my knowledge. Can someone with this machine please send me some pictures of the control and operator panel? Any manuals would be helpful also! Thanks Jim

  2. #2
    Join Date
    Feb 2020
    Posts
    12

    Re: FEMCO HL25E DURGA HELP

    New to the site and just saw your post in 2011 .,,,,
    were you able to purchase the soft covers for your control
    also have you had to purchase any new buttons for your other
    panel...... ours pops off and get carried out in chips over years and
    we need to purchase more...... can you offer up any help in this manner
    thank you in advance

  3. #3
    Join Date
    Jun 2013
    Posts
    6

    Re: FEMCO HL25E DURGA HELP

    Help me please,
    I have lost the 900 parameters of femco hl-25, with fanuc 0t control, the serial number is L12-0802, my problem started because the turret servo lost the battery, and trying to solve it, I performed a hard reset without realizing that my backup did not have parameters 900.help please


    [email protected]

  4. #4
    Join Date
    Jun 2013
    Posts
    6

    Re: FEMCO HL25E DURGA HELP

    please help me

Similar Threads

  1. FEMCO Durga 25-E
    By chich2 in forum MetalWork Discussion
    Replies: 66
    Last Post: 06-22-2020, 04:39 AM
  2. Femco Durga 25-E
    By Billet Sean in forum Uncategorised MetalWorking Machines
    Replies: 1
    Last Post: 02-13-2020, 02:30 PM
  3. FANUC 0T FEMCO DURGA 25E
    By saul in forum Fanuc
    Replies: 1
    Last Post: 05-20-2013, 10:29 PM
  4. Femco Durga 15E and 25E X axis error.
    By MetalusCobalt in forum Maintenance DIY Discussion
    Replies: 0
    Last Post: 10-04-2012, 03:27 PM
  5. FEMCO DURGA 25E
    By destinationmx in forum Uncategorised MetalWorking Machines
    Replies: 2
    Last Post: 11-25-2008, 01:00 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •