I am trying to fix my Mazak Lathe. We bought the machine after it had been sitting for a while. I couldn't use the controller without reinitializing the machine. Problem now is I do not have any ladder or macro. I have hand entered in all the parameters, but I have no idea what I am doing when it comes to the rest of the macros and ladder problem. Is this something that I can get somewhere, or am I in trouble. Any help would be appreciated. I am pretty much as far as I can go on my own.
Results 1 to 2 of 2
-
06-19-2014, 10:38 PM #1
Registered
- Join Date
- Oct 2007
- Posts
- 6
Mazak M5N with T32-2 Controller battery died
-
06-19-2014, 11:21 PM #2
Registered
- Join Date
- Oct 2007
- Posts
- 6
Re: Mazak M5N with T32-2 Controller battery died
Sorry I believe I am missing the machine control programs.
Reply With QuoteSimilar Threads
-
Citizen E32 servo alarms after battery died
By brainbuktl in forum CNC Swiss Screw MachinesReplies: 3Last Post: 04-05-2014, 06:27 PM -
DOOSAN BATTERY DIED NOW REF RTN AND PROGRAM "X" ZERO IS OFF
By ewb727 in forum Daewoo/DoosanReplies: 3Last Post: 12-11-2013, 04:01 PM -
FH6800
By jimica in forum Mazak, Mitsubishi, MazatrolReplies: 0Last Post: 06-15-2013, 10:49 AM -
MY CNC CONTROLLER DIED
By AAASIGN in forum Want To Buy...Need help!Replies: 3Last Post: 08-04-2010, 03:38 PM -
MAZAK QT8 BATTERY BACKUP
By nogginkj in forum CNC (Mill / Lathe) Control Software (NC)Replies: 0Last Post: 12-24-2009, 11:30 AM
Tags for this Thread
Posting Permissions
