Can anyone tell me if there is a way to find or determine the spindle centerline on my cincinnati avenger lathe. I'm trying to get some drilling procedures to work on this machine.
Can anyone tell me if there is a way to find or determine the spindle centerline on my cincinnati avenger lathe. I'm trying to get some drilling procedures to work on this machine.
You will need to mount an indicator on the face of the chuck and swing a boring bar holder.If you cant get it with in .001.the turret is out of line(this will cause major drilling problems).The maintaince manual has instructions on how to line it up.
Hey: can someone help me figure out how to adjust a spindle. I have a cincinnati avenger lathe and my x-axis is out of wack. I've looked at my manual and of course it isn't complete enough to show me the proper adjustment procedures. My manual does show me how to adjust the head but mine is different from the manual.
does anyone have a listing of what arcamatic 850 sx mtb commisioning data is and system commisioning data? use to have what the list is can't find it
It is in the back of the 850SX control reference manual.
MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services
hi
I have a problem with a sabre 1000 acramatic 850 sx.
ALERT 00057 SUBROUTINE NOT FOUND , after MAI SOFTWARE INICIALITE shows up.
the control reference manual says get the UPDATE FLASH CARD , to modify the MCL
somebody got this kind of info?
thanks
DM