[Taleismin]

Hi Guys I'm hoping someone can help me. I am using a program named Cadman and its for a 320 ton Press break. I have the option of inputing dxf sat iges and step files to run a simulation of the part to be pressed. However my company is on using dxfs with bend lines. Now my issue is the Cadman software sometimes crashes when using dxfs(which is getting real frustrating) so I'm trying to find a program that will convert dxf to either iges sat or step. Anyone know of a software program????

I also am using a very old version of Cad std.

thanks in advance
Michael

[Taleismin]

Burr Man, please find attached.

[BurrMan]

I may have misread the original post. I was going off of a "dxf is crashing my system", when you were asking about programs that will save out the different formats to try....

Here's your dxf saved as a dxf to try... (Did that sample dxf crash your system? See if this one does... Maybe your system is looking for a 3d dxf and this one is just 2d?)

But, on the note of a program that will convert the file? There are many. Viacad is cheap and will do it. Moi3D is a good choice.

There are many....

[Taleismin]

DXF still crash the press software... I can open the iges file cnczone wont let me?

[BurrMan]

I attached a zip file with your file saved out as an iges format. Download the zip and then extract the iges file... (you wont be able to open it directly from the zone)