585,573 active members*
3,516 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Mastercam > Problem driving long tools into vice......second version.seems version one is closed.

Thread: Problem driving long tools into vice......second version.seems version one is closed.

Results 1 to 6 of 6

Threaded View

  1. 06-24-2014, 04:31 PM #1
    dougputt
    dougputt is offline Registered
    Join Date
    Aug 2007
    Posts
    298

    Problem driving long tools into vice......second version.seems version one is closed.

    With X5 Mcam and fadal format 2 after I complete a tool cycle (using tools with a + compensation due to long length) the compensation comes off after the cycle then the machine attempts to move z back to the 0 position on whatever work offset I am using....with bad results ...

    attached is generic format post for fadal
    Attached Files Attached Files
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Driving long tools through the vice
    By dougputt in forum Mastercam
    Replies: 75
    Last Post: 07-07-2014, 09:41 AM
  2. CNC Tools Alpha version, looking for ideas, thoughts etc..
    By rvt in forum OpenSource Software
    Replies: 0
    Last Post: 12-23-2013, 11:09 PM
  3. powermax 45 machine version vs hand version
    By landmark in forum Hypertherm Plasma
    Replies: 1
    Last Post: 02-14-2010, 11:13 PM
  4. VCarve Pro Trial version 3.0: any newer version?
    By monte55 in forum Vectric
    Replies: 2
    Last Post: 12-12-2006, 12:12 AM
  5. Older version g320 with long leads
    By kiepie in forum Gecko Drives
    Replies: 0
    Last Post: 11-01-2005, 09:03 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules