Hey Guys! I'm having a weird issue, and was hoping someone might be able to help me out.

I have been trying to tune my machine to make sure that I'm cutting slow/fast enough for the parts I have, and so I'm trying to use correct feed rates with Cam software (I'm using CamBam and Mach3 for the controller).

By watching the machine operate, and playing with feed rates, it looks like I should be going at like 800- which seems CRAZY high. After contacting a K2 rep, I was told that the fastest my machine should/could go is 200 inches/min (80 inches/min for typical speed). So... what's going on here? What setting do I need to correct? How do I tune my machine so that when I put 200 in CamBam, it's running at top speed in Mach3, instead of like 800?

Any help would be GREATLY appreciated!

Thank you!