584,842 active members*
4,614 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Dolphin CAD/CAM > Radius to end of arc differs from radius start
Results 1 to 4 of 4
  1. #1
    Join Date
    May 2003
    Posts
    132

    Radius to end of arc differs from radius start

    I am having trouble getting Mach3 to do a profile cut using Dolfincam. I get a Radius end of arc differs from radius start. I'm using the T_Mach3DCSS post processor. I'm cutting a ball on the end of a rod. Any Help would be greatly appreciated.
    Thanks
    Donald Clifton

  2. #2
    Join Date
    Mar 2003
    Posts
    35538

    Re: Radius to end of arc differs from radius start

    Change the IJ mode in General Config and see if that fixes things.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  3. #3
    Join Date
    May 2003
    Posts
    132

    Re: Radius to end of arc differs from radius start

    Thanks Ger, That's the first thing I tried. Do you use Dolfincam? Your always real helpful.
    Thanks
    Don Clifton

  4. #4
    Join Date
    May 2007
    Posts
    428

    Re: Radius to end of arc differs from radius start

    Don, I just emailed you 2 different posts to try (one for radius and one for diameter).
    Dolphin CAD/CAM Support

Similar Threads

  1. 021 start radius end radius error
    By XAD in forum Tree
    Replies: 55
    Last Post: 06-01-2012, 04:59 PM
  2. Replies: 7
    Last Post: 10-06-2011, 04:43 AM
  3. Radius to end of Arc Differs From Radius to Startline
    By Bob La Londe in forum Machines running Mach Software
    Replies: 2
    Last Post: 08-10-2010, 03:16 AM
  4. Replies: 8
    Last Post: 11-15-2009, 01:35 PM
  5. Radius to end of arc differs from radius to start?
    By Jamy in forum LinuxCNC (formerly EMC2)
    Replies: 2
    Last Post: 08-23-2009, 05:28 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •