584,808 active members*
5,242 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > X & Y axis home refrence on 2100sy
Results 1 to 4 of 4
  1. #1
    Join Date
    Jun 2003
    Posts
    11

    X & Y axis home refrence on 2100sy

    Can anyone provide info on resetting home on the y & x axis on a 2100sy with 31i control?

  2. #2
    Join Date
    Feb 2013
    Posts
    788

    Re: X & Y axis home refrence on 2100sy

    Yes.
    Is it with or without absolute? (what is the value in all 8 bits of parameter 1815 for both the Y and X axes?

    I have attached the procedures for both styles.

    Absolute=dogless
    Attached Thumbnails Attached Thumbnails TEC2013-64 HOW TO SET THE HOME POSITION(DOGLESS).pdf   TEC2013-65 HOW TO SET THE HOME POSITION(DOG).pdf  
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  3. #3
    Join Date
    Jun 2003
    Posts
    11

    Re: X & Y axis home refrence on 2100sy

    Thanks dhardt,
    I figured out over the weekend that it can be done the same as Hardinge machines we have but thanks for the tech documents which have been
    saved for anyone in the future.

  4. #4
    Join Date
    Feb 2013
    Posts
    788

    Re: X & Y axis home refrence on 2100sy

    Anytime.
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

Similar Threads

  1. Post processor for a Doosan 2100sy
    By Slugworth in forum EdgeCam
    Replies: 1
    Last Post: 04-18-2014, 03:49 PM
  2. puma 2100sy to lns sprint 565
    By GreggC in forum Daewoo/Doosan
    Replies: 0
    Last Post: 12-27-2013, 03:00 PM
  3. Doosan Puma 2100SY
    By Mikey4865 in forum Daewoo/Doosan
    Replies: 13
    Last Post: 01-29-2013, 08:37 PM
  4. Stuck on Y refrence
    By thomasmc in forum Linear and Rotary Motion
    Replies: 0
    Last Post: 06-30-2009, 02:56 PM
  5. there must be a refrence....?
    By ahmed drdeer in forum Mechanical Calculations/Engineering Design
    Replies: 5
    Last Post: 05-22-2005, 06:42 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •