585,700 active members*
4,642 visitors online*
Register for free
Login
IndustryArena Forum > Events, Product Announcements Etc > Want To Buy...Need help! > OP connector sanyo denki servo PV drive - looking for connector

Thread: OP connector sanyo denki servo PV drive - looking for connector

Results 1 to 3 of 3
  1. 07-08-2014, 02:13 AM #1
    gm276
    gm276 is offline Registered
    Join Date
    Aug 2006
    Posts
    20

    OP connector sanyo denki servo PV drive - looking for connector

    Any one know where to buy a connector for Sanyo denki servo OP connector.
    It is some kind of 20 pin dual inline.
    THX Don B in PA
    Reply With Quote Reply With Quote
  2. 07-15-2014, 10:28 PM #2
    gm276
    gm276 is offline Registered
    Join Date
    Aug 2006
    Posts
    20

    Re: OP connector sanyo denki servo PV drive - looking for connector

    ended up making my own.
    routed two pcbs like edge connectors. 1.27mm pitch.
    put one on each side of op connector. soldered leads on to pcbs.
    seems like it works fine.
    Don B
    Reply With Quote Reply With Quote
  3. 12-15-2018, 07:39 PM #3
    prguy35
    prguy35 is offline Registered
    Join Date
    Sep 2014
    Posts
    3
    Quote Originally Posted by gm276 View Post
    Any one know where to buy a connector for Sanyo denki servo OP connector.
    It is some kind of 20 pin dual inline.
    THX Don B in PA
    The pins fit an mdr receptacle but the plastic case has to be filed to fit. The mdr is avail from digikey or ebay. I raise this is an old thread but I just went through this in case anyone needs it.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Ultra100 drive (1398ddm019) to a Sanyo Denki Motor
    By vmax549 in forum Servo Motors / Drives
    Replies: 1
    Last Post: 07-29-2013, 05:48 PM
  2. Japan Servo Connector - help locating
    By distracted in forum Stepper Motors / Drives
    Replies: 7
    Last Post: 06-05-2012, 04:38 PM
  3. Sanyo Denki Drive
    By RAC in forum Servo Motors / Drives
    Replies: 0
    Last Post: 03-21-2009, 06:01 PM
  4. Sanyo Denki Drive
    By RAC in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 0
    Last Post: 03-21-2009, 05:09 PM
  5. Sanyo Denki Drive Problem
    By cncdiag in forum Servo Motors / Drives
    Replies: 0
    Last Post: 06-03-2008, 05:12 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules