So I had a question I figured Id ask directly as this forum is a pain to scour through to find the info you need. You can see my build log I just updated as I am getting closer to finishing my CNC Router Parts PRO4824. I was slacking hardcore in my updates as it took much longer than expected and I focused on my PC modding forum and kinda fell off here, but I am back now caught up and active here again as the machine it about to be finished, well not finished but is getting very close to being usable. So, I am using a Huanyang 1.5Kw 220v spindle. I meant to get a 110v inverter but the dummies sent the wrong one and I wasn't about to send it back so Ill just either get a step up transformer or run a 220v line. Now I was looking for information on how to set up that spindle with my Gecko540 from CNCRP. Also if any rep from CNCRP knows how to do this it would be a useful tutorial to put on the website. Thanks in advance...