585,715 active members*
3,750 visitors online*
Register for free
Login

Thread: HSC milling

Results 1 to 2 of 2
  1. 06-26-2009, 06:42 AM #1
    hmoc
    hmoc is offline
    Join Date
    Feb 2008
    Posts
    9

    Hello forum
    Is it possible to change the diameter of the circular motion by HSC milling?
    I’d like to mill a nut b20 with a 16HM cutter.

    Greetings
    Reply With Quote Reply With Quote
  2. 07-02-2009, 07:04 AM #2
    Yardman
    Yardman is offline
    Join Date
    Jun 2008
    Posts
    39
    Hello hmoc,

    It was changed on July first and has to be in the internet as an update from this day forward.

    The thing now works so that the “overlap” arranges the diameter of the circle (positive value=% from cutter diameter / negative=radius in mm) and the “directional overlap” arranges the improvement for each circular motion (+/- as above)
    It always makes 90% from path to path.

    Greetings
    Yardman
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules