[bernd_k]

Hi everybody

I’d like to change the program’s head (example)

1 BEGIN PGM 0 MM
2 ; 0
3 ;
4 BLK FORM 0.1 Z X-49.0 Y-49.0 Z-20.0
5 BLK FORM 0.2 X49.0 Y49.0 Z0.0
6 ; KUGELFR_2MM
7 TOOL CALL 1 Z S6000 DL+0.0 DR+0.0

I don’t want to create the lines 2+3!

Where is the PP in Peps and how can I change it?

Greetings
Bernd_K

[Mecofspa]

Hi everybody

I’d like to change the program’s head (example)

1 BEGIN PGM 0 MM
2 ; 0
3 ;
4 BLK FORM 0.1 Z X-49.0 Y-49.0 Z-20.0
5 BLK FORM 0.2 X49.0 Y49.0 Z0.0
6 ; KUGELFR_2MM
7 TOOL CALL 1 Z S6000 DL+0.0 DR+0.0

I don’t want to create the lines 2+3!

Where is the PP in Peps and how can I change it?

Greetings
Bernd_K

Forgive me my ignorance, but what do you mean with Peps?

[Jack17]

Forgive me my ignorance, but what do you mean with Peps?

Hello

Peps is a CAD/CAM system, as you can see in the advertisement here in the forum

[narator]

Hi
Just call Camtek up and say you need adjustment for tnc530
It’s free

Greetings

[Mecofspa]

Ok, I saw it. Being able to read is an advantage…

[Yardman]

Hi
Just call Camtek up and say you need adjustment for tnc530
It’s free

Greetings

Hi
You deal very generously with the money of other people

But Camtek won’t charge too much in this case.

So Bernd_K: just get in touch with Camtek. If you’ve got internet access on your PC, it’s an advantage. Then the bill will be less.

Greetings
Yardman

[narator]

Hi
You deal very generously with the money of other people

But Camtek won’t charge too much in this case.

So Bernd_K: just get in touch with Camtek. If you’ve got internet access on your PC, it’s an advantage. Then the bill will be less.

Greetings
Yardman

Well, it has never cost anything for us. Maybe is it temporary or is an additional option?
Yardman as I understand, you’re from Camtek.
So please clear it up

P.S.: I’m currently testing the Ver7. The optimised roughing in 3D is great!