Hello everyone
I set up all our tool holders and allocated them to the correct tool in the data base. However In the simulation is still only see the standard holder.
What am I doing wrong?
We also have another problem: Our data base contains around 1000 tools with a fixed number. With 3D OP’s a new number beginning from T1 is allocated. Hence afterwards we have to change that number back to the original number. That is very time consuming and annoying!
Thread: tool holder in Simulation
Results 1 to 2 of 2
-
04-15-2012, 11:26 AM #1
- Join Date
- Nov 2008
- Posts
- 21
-
04-16-2012, 04:35 PM #2
- Join Date
- Dec 2007
- Posts
- 198
Hello
What version have you got?
I had the same problem but it got solved through an online update!
I would solve your 3D problem by creating a tool list only for 3D- hence creating a new program and allocate their numbers to the tools that you really need. Then save the tool list!
With a new program simply load up the list-
Kind regards
Reply With Quote
Posting Permissions
