584,814 active members*
5,420 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Uncategorised CAM Discussion > Proficam crashes in Open GL simulation
Results 1 to 2 of 2
  1. #1
    Hello everybody

    Since begin 2009 I’ve been working with the version 2008.
    Proficam often crashes during 3D roughing in Open GL mode.
    In a normal mode usually not.
    What can be the reason?
    The hotline always say that don’t have time for it…

  2. #2
    Hello
    There’s a tool with which Cosmos can access your computer via internet.
    I used it several times and it always worked.

    A good contact person is Mr. Meerstein (Coscom in Ebersberg)

    I have had crashes in Open GL, too.
    The reason was either wrong inserted tool or feedstock.

    Regards, millingcutter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •