Originally posted by The Puma Man (quoting didn't work)
So Geoff, you think you’re so clever. I can sharpen a drill in less than a minute using our drill grinders, unless it’s a big drill bit say 40 mm dia. and above, which takes possibly 2 minutes. Now I’m talking about repeatability and very quick turn around because in the airbus industry of which I work we cannot afford to have one, scrap, and two, unreliability and if you say you can grind 100 drills in say 2 hours’ by hand and they all cut size FIRST TIME, well I’ m thinking you must be Clark Kent
--------------------------------------------------------------------------
Originally Posted by
Geof
Geof is clever, wise, and cool
I am Honored to be able to visit a place with members like him, Widgitmaster (Eric), LakeSide (Mike M), Tjones, Gandalf (Wolfgang), MetLHead (Scott), Ger21, Huflungdung, GenGuy, CarbideCraters, Miljnor and so many others. I've made a lot of good friends here.
We come here to Help and be Helped, not to Knock eachother.
And if I sound corny.......GOOD!!!!!!!
Pumaman,
Take it easy Dude!!!!!!!! (wrong) This isn't a compitition!!!!!!!!
Toby D.
"Imagination and Memory are but one thing, but for divers considerations have divers names"
Schwarzwald
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
www.refractotech.com