Hello happyhias
Yes we did the change to the 19 version. There were many ‘bigger’ problems before the last update. So you should definitely install it.
Most of the current errors that were eliminated with the previous update (according to the support) where reported by German users. I guess we take it more serious in Germany than in the rest of Europe.tounge.gif
We only had problems executing the update.cfg- many of the system settings from the V18 were not transferred. So a lot of manual rework was necessary! =(
Apart from that I am really surprised in a positive way about all the stuff that has changed regarding the machining and also the CAM calculation speed is definitly quicker.
I think the V19 is definitely a step in the right direction but there is still work to be done.
...although I am waiting for a long time that Vero changes its installation routine... who needs an install in all kinds of languages?
,
<b>Gruß / Regards</b><br /><i><b>CNCFanatiker</b></i><br />AdminCrew<br /><br />Wenn wir immer das tun was wir können, dann bleiben wir immer das was wir sind.<br />If we always this act what we are able to do, then we always remain what we are.