584,812 active members*
5,255 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Hello
    I want to create a 5axial program with visi17. The programming goes alright.
    However, the postprocessor only releases a 3 axial program. Could it be that have to reset/ change anything?
    I am using a standard postprocessor (fanuc) that came with Visi 17.

    Can anybody help me out?

    Regards
    Steffen

  2. #2
    Join Date
    Dec 2001
    Posts
    5151
    Hello
    I want to create a 5axial program with visi17. The programming goes alright.
    However, the postprocessor only releases a 3 axial program. Could it be that have to reset/ change anything?
    I am using a standard postprocessor (fanuc) that came with Visi 17.

    Can anybody help me out?

    Regards
    Steffen




    Hello Steffen

    You can’t create any simultaneous programs with a 3 axial standard PP.
    Who is the Reseller that is responsible for you?
    You should talk to him because usually you let an expert adjust your PPs.
    3-axis PP / 3+2 - axis-PP / simultaneous-PP
    Just out of interest- why are you still using visi17?
    <b>Gruß / Regards</b><br /><i><b>CNCFanatiker</b></i><br />AdminCrew<br /><br />Wenn wir immer das tun was wir können, dann bleiben wir immer das was wir sind.<br />If we always this act what we are able to do, then we always remain what we are.

  3. #3
    Hi
    I use visi17 privately on my desktop milling machine. As far as I know its a 5 axis pp.
    I already adjusted it a little bit. Anyway the 4+5 axis is exactly written like xyz.
    Have you got an idea how to get a 5 axial pp?
    I can’t afford to get one programmed. I am only a poor student.

    Regards

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •