584,846 active members*
4,038 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > CAM System - Compare > esprit/top solid or solid cam?
Results 1 to 3 of 3
  1. #1
    Hello
    We’re going to buy a new system for working with 2,3-3D and turn-milling.
    We’re going to choose between esprit/top solid by missler and solid cam.
    What are your experiences with these systems?

  2. #2
    Join Date
    Mar 2002
    Posts
    242
    Hello
    We’re going to buy a new system for working with 2,3-3D and turn-milling.
    We’re going to choose between esprit/top solid by missler and solid cam.
    What are your experiences with these systems?
    Hello i_bins

    I’m here as a trader and my experience is probably not experience of a user…
    Anyway Esprit provides all you need and it’s easy in usage and learning.
    It would nice to communicate. I’d give you a couple of addresses around you, where you could go if you have questions.
    It’s not always easy for the people here in the forum because there’re things that are liable to concealment. But we always have managed to bring customers together.
    Get in touch – consulting is for free

    Regards
    Susanne
    Gib's her - ich bekomms klein!

  3. #3
    Hello ibins,

    We provide TopSolid in Germany. Please send me your contact details so that we could get in touch with you…

    Thanks in advance

    Greetings
    Moritz Schneider
    AdeQuate Solutions GmbH
    Freundliche Grüße<br />Moritz Schneider <br />AdeQuate Solutions GmbH<br />Werderstrasse 34<br />D-77933 Lahr<br />-------------------------------------------------------------------------------------------- <br />Fon: +49 (0) 7821 923 76 - 18<br />Fax: +49 (0) 7821 923 76 - 20<br />Mail: [email protected]<br /> <br /> <br />Mehr über CAD/CAM Wissen www.AdeQuateSolutions.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •