[liftlar83]

Good evening everybody!

We bought a low priced Mahomat, year of manufacture 1992.
Now there’s a question what software we should take to feed it with programs.
Some of you certainly have experience with Philips 432 combined with a DNC (Mastercam)

We mostly mill single components or series of max. 10 parts.
No 3D machining.
The software has to be able to import dxf.

Thanks in advance!

[DirkP]

I believe mastercam and a machine that is 18 years old is a bad combination. It would probably cost more than the machine.
Take a look here www.condacam.de - starting from 600€ with 3D milling.

Or www.sheetcam.com - costs about 150€ but has only 2D milling and doesn’t have any possibility for drawing.