584,830 active members*
5,662 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Join Date
    Jun 2008
    Posts
    1
    Hello,
    I’ve been working with UG NX4 for a couple of days and I still can’t understand how PP works with NURBS.
    When I try to use PP, I get an NC file that doesn’t contain NURBS.

    Here’s a part of this file:

    N0010 G40 G17 G90 G70
    N0020 G91 G28 Z0.0
    :0030 T00 M06
    N0040 G0 G90 X0.0 Y0.0 S0 M03
    N0050 G43 Z0.0 H00
    N0060 G1 X.5947 Y.0319 F9.8 M08
    N0070 G0 X1.1686 Y-.1012
    N0080 M02

    I have read that G06.2 start NURBS interpolation mode. Why don’t I have G06.2 then?

    Thanks in advance!

    Regards

    Tsvetoslava

  2. #2
    Join Date
    Jun 2002
    Posts
    825
    I believe the PP didn’t internalize this function.
    I mean: function not implemented.

    t.
    Grüßle<br />nebbe

  3. #3
    Join Date
    Dec 2001
    Posts
    719
    Hello,

    You have to understand operating mode of our system.
    Our PP doesn’t grip for one limited CL file or CLSF. It generates output as NC-program, tool list etc. directly from generated operations. There’s no NURBS output in the CL file.

    Why do you want to use Nurbs?

    Regards
    mneubert<br /><br />Siemens PLM Software<br />Technische Vertriebsunterstützung

  4. #4
    Join Date
    May 2008
    Posts
    192
    Why do you have 4 positions after the comma? Is it in inch? Or is it postprocessed in linear clauses?
    You should better have a direct output, not with linear clauses.

    Regards

    km

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •