501,916 active members
5,724 visitors online
Register for free
Login
Results 1 to 2 of 2
  1. #1

    Join Date
    Mar 2012
    Posts
    8
    Hello everybody
    I am working with Pro/NC Wildfire 4 for 4 months now. Even though I have no experience with any CAM systems I cope quite well with Pro/NC.
    However I have a little problem now:
    I want to mill a thread. Generally that’s no problem but I really need a radius correction with this NC series. The help in Pro/E did not help me out.
    I appreciate any suggestions!

  2. #2
    Junior Member
    Join Date
    Apr 2003
    Posts
    284
    Hello

    If I remember correctly then you can change from CUTCOM to LEFT in the parameters.
    I think, you can select on the last rider normal approach/departure pathin the dialog where you can select the axis..
    Finished. How you should have at least the radius correction in the CL_DATA.
    What you PP does with it is a different story..
    No brain no pain&#33; <br><br>www.JackTools.Net

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •