584,833 active members*
5,685 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Feb 2005
    Posts
    52
    Hi,
    Is anybody familiar with the MTX 10VRS? In particular with the JerkControl ?
    I have a problem with the line-by-line ¬milling: with each path adjustment, the feed quickly stops.
    G8 and G62 are active.

    Program was created using MasterCam.
    Many thank in advance

  2. #2
    Join Date
    Jul 2005
    Posts
    7
    Hello Scrats,
    Can you post your NC Code.
    In principle G8 and G62 are ok.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •