584,829 active members*
4,886 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1
    I have a problem with changing tools in a DMC 50V from -96 with a Grundig Dialog 112 controll

    The machine has been used in production but only with one mill and therefore not using the tool changer for over ten years, last week we had a service engineer from DMG Scandinavia here for a check on the machine, and when he tried to change tool the machine "locked" itself.

    There is in the manual a procedure how to run the machine free from the tool changer if there is a malfunction, but I got no response or movement with this procedure.

    Do anyone perhaps have any idea on how to solve this problem?

  2. #2
    I got hold of a former employee of Deckel i Sweden he had a service manual with "the code" for the service menu in the Grundig control

  3. #3

    The code

    [QUOTE=Axegone;1513733]I got hold of a former employee of Deckel i Sweden he had a service manual with "the code" for the service menu in the Grundig control[/QUOT

    Did he tell you thw code and how entry ?????

    I have the same problem.

    Thanks in advance

    Daniel

  4. #4

    Re: DMC tool changing Problem

    Hi all,

    hope you can use this one...


    Best regards,
    Freddie Ourø Gaardbye
    [email protected]
    www.cnc-consult.dk

    Click image for larger version. 

Name:	DMC50V.JPG 
Views:	9 
Size:	119.7 KB 
ID:	434612

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •