585,987 active members*
4,623 visitors online*
Register for free
Login

Thread: G command

Results 1 to 3 of 3
  1. 05-22-2008, 01:10 PM #1
    swatcher
    swatcher is offline
    Join Date
    Apr 2003
    Posts
    237
    Hello everybody

    I know that it’s possible to define own G commands for subprograms and macros via parameters. Unfortunately I don’t have the manual.
    Does anyone know it by heart?

    It’s for 31i controller

    Thanks
    Reply With Quote Reply With Quote
  2. 05-27-2008, 10:08 PM #2
    cnc roland
    cnc roland is offline
    Join Date
    Sep 2004
    Posts
    53
    Hello!

    I’d like to know it too.

    I have 16i controller

    Thanks!

    CNC Roland
    Reply With Quote Reply With Quote
  3. 05-27-2008, 11:57 PM #3
    stoNestoNe
    stoNestoNe is offline
    Join Date
    Jul 2006
    Posts
    213
    The numbers can be defined with parameters #6050 to #6059.
    They are assigned to program numbers 09010-09019

    For example, if you enter 81 in the parameter #6050, then the program 09010 can be cylled with G81

    O9010 = #6050
    O9011 = #6051
    O9012 = #6052
    O9013 = #6053
    O9014 = #6054
    O9015 = #6055
    O9016 = #6056
    O9017 = #6057
    O9018 = #6058
    O9019 = #6059

    But it’s always variably which G commands are frei. You should research that yourself
    Die Wissenschaft heisst Wissenschaft,<br>weil die Wissenschaft Wissen schafft.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules