584,817 active members*
4,983 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Hello

    I have a problem with Manual Guide I.
    During the process I can’t changed the details of wear and tear of the tools on the Manual Guide I offset screen.
    The following message comes up: Don’t enter data during automatic mode!

    Can anybody help me?

    Regards Michael

  2. #2
    Hello
    That’s because of security issues. During the processing you can’t change anything. That doesn’t work with the Offset values G54 and so on either.
    I don’t know if there is a possibility to overcome that ‘security hurdle’
    However I only ever change my values during standstill.
    <!--coloro:#0000FF--><span style="color:#0000FF"><!--/coloro-->Der Vorteil der Klugheit besteht darin, daß man sich dumm stellen kann.<br />Das Gegenteil ist schon schwieriger.<br />Kurt Tucholsky <!--colorc--></span><!--/colorc--><br /><br />GRUß<br /><br />HOLZSCHNELLER CHRISTIAN<br /><br />Mori Seiki <!--coloro:#FF0000--><span style="color:#FF0000"><!--/coloro-->NV5000 α1B/40<!--colorc--></span><!--/colorc--> // <!--coloro:#FF0000--><span style="color:#FF0000"><!--/coloro-->NMV5000<!--colorc--></span><!--/colorc-->// hyperMILL// HSMWorks // Fanuc 31iA5

  3. #3
    Join Date
    Mar 2004
    Posts
    239
    Hello
    I generally only correct my tools on the ‘normal’ Fanuc surface.
    That is easier and always possible.
    Niko

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •