584,866 active members*
5,228 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Hello guys!
    I have a problem with my Mori SL25-M.
    I have bought the machine from a business failure and I can’t get it running.
    What do I have to do to drive the machine to reference? How do you set the neutral point?
    I used to have an Okuma but this one here is a different calibre.

    Please help me out- or I will get even more gray hairs....

  2. #2
    We also have a SL25. Our machine has an absolute measuring system – so no reference drive is necessary!

    So relieve the axes, press the Rrf. button and then the button for X+ and Z+.

    Then they should approach the reference point.
    To set the neutral point: for example through scrapping. Call a measured tool and a neutral point over MDI .(e.g. G54 G0 T0101) press ) "EOB" and"Insert".
    Press cycle start button. Scrap and enter Z0 under Offset in G54, then press ‘measure’.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •